.. _LMI-PowerManagementCapabilities:

LMI_PowerManagementCapabilities
-------------------------------

Class reference
===============
Subclass of :ref:`CIM_PowerManagementCapabilities <CIM-PowerManagementCapabilities>`

A class derived from Capabilities that describes the power management aspects of an element (typically a system or device). The power management capabilities of the element are decoupled from a PowerManagementService, because a single service could apply to multiple elements, each with specific capabilities.


Key properties
^^^^^^^^^^^^^^

| :ref:`InstanceID <CIM-ManagedElement-InstanceID>`

Local properties
^^^^^^^^^^^^^^^^

.. _LMI-PowerManagementCapabilities-PowerStatesSupported:

``uint16[]`` **PowerStatesSupported**

    An enumeration that indicates the power states supported by a managed element. Because this is an array, multiple values can be specified. The current values in the enumeration are: 

    2=On, corresponding to ACPI state G0 or S0 or D0. 

    3=Sleep - Light, corresponding to ACPI state G1, S1/S2, or D1. 

    4=Sleep - Deep, corresponding to ACPI state G1, S3, or D2.

    5=Power Cycle (Off - Soft), corresponding to ACPI state G2, S5, or D3, but where the managed element is set to return to power state "On" at a pre-determined time. 

    6=Off - Hard, corresponding to ACPI state G3, S5, or D3. 

    7=Hibernate (Off - Soft), corresponding to ACPI state S4, where the state of the managed element is preserved and will be recovered upon powering on. 

    8=Off - Soft, corresponding to ACPI state G2, S5, or D3. 9= Power Cycle (Off-Hard), corresponds to the managed element reaching the ACPI state G3 followed by ACPI state S0. 

    10=Master Bus Reset, corresponds to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system master bus reset. 11=Diagnostic Interrupt (NMI), corresponding to the system reaching ACPI state S5 followed by ACPI state S0. This is used to represent system non-maskable interrupt. 12=Off - Soft Graceful, equivalent to Off Soft but preceded by a request to the managed element to perform an orderlyshutdown. 

    13=Off - Hard Graceful, equivalent to Off Hard but preceded by a request to the managed element to perform an orderly shutdown. 

    14=Master Bus Rest Graceful, equivalent to Master Bus Reset but preceded by a request to the managed element to perform an orderly shutdown. 

    15=Power Cycle (Off - Soft Graceful), equivalent to Power Cycle (Off - Soft) but preceded by a request to the managed element to perform an orderly shutdown. 

    16=Power Cycle (Off - Hard Graceful), equivalent to Power Cycle (Off - Hard) but preceded by a request to the managed element to perform an orderly shutdown. 

    17=Diagnostic Interrupt (INIT), equivalent to Diagnostic Interrupt (NMI) but performed by an INIT switch instead because the NMI signal is masked. 

    ..=DMTF Reserved. 

    0x7FFF..0xFFFF = Vendor Specific.

    
    ============== =================================
    ValueMap       Values                           
    ============== =================================
    1              Other                            
    2              On                               
    3              Sleep - Light                    
    4              Sleep -Deep                      
    5              Power Cycle (Off - Soft)         
    6              Off - Hard                       
    7              Hibernate (Off - Soft)           
    8              Off - Soft                       
    9              Power Cycle (Off-Hard)           
    10             Master Bus Reset                 
    11             Diagnostic Interrupt (NMI)       
    12             Off - Soft Graceful              
    13             Off - Hard Graceful              
    14             Master Bus Reset Graceful        
    15             Power Cycle (Off - Soft Graceful)
    16             Power Cycle (Off - Hard Graceful)
    17             Diagnostic Interrupt (INIT)      
    ..             DMTF Reserved                    
    0x7FFF..0xFFFF Vendor Specific                  
    ============== =================================
    

Local methods
^^^^^^^^^^^^^

*None*

Inherited properties
^^^^^^^^^^^^^^^^^^^^

| ``string`` :ref:`ElementName <CIM-Capabilities-ElementName>`
| ``string`` :ref:`OtherPowerChangeCapabilities <CIM-PowerManagementCapabilities-OtherPowerChangeCapabilities>`
| ``string[]`` :ref:`OtherPowerCapabilitiesDescriptions <CIM-PowerManagementCapabilities-OtherPowerCapabilitiesDescriptions>`
| ``string`` :ref:`Description <CIM-ManagedElement-Description>`
| ``string`` :ref:`Caption <CIM-ManagedElement-Caption>`
| ``uint16[]`` :ref:`RequestedPowerStatesSupported <CIM-PowerManagementCapabilities-RequestedPowerStatesSupported>`
| ``uint64`` :ref:`Generation <CIM-ManagedElement-Generation>`
| ``uint16[]`` :ref:`PowerChangeCapabilities <CIM-PowerManagementCapabilities-PowerChangeCapabilities>`
| ``string`` :ref:`InstanceID <CIM-Capabilities-InstanceID>`
| ``uint16[]`` :ref:`PowerCapabilities <CIM-PowerManagementCapabilities-PowerCapabilities>`

Inherited methods
^^^^^^^^^^^^^^^^^

| :ref:`CreateGoalSettings <CIM-Capabilities-CreateGoalSettings>`

